当前位置:
首页 > 社会科学 > 法律 > DL/T5418-2009火电厂烟气脱硫吸收塔施工及验收规程(英文版)pdf/doc/txt格式电子书下载

DL/T5418-2009火电厂烟气脱硫吸收塔施工及验收规程(英文版)pdf/doc/txt格式电子书下载

本站仅展示书籍部分内容

如有任何咨询

请加微信10090337咨询

DL/T5418-2009火电厂烟气脱硫吸收塔施工及验收规程(英文版)pdf/doc/txt格式电子书下载

书名:DL/T5418-2009火电厂烟气脱硫吸收塔施工及验收规程(英文版)pdf/doc/txt格式电子书下载

推荐语:

作者:中国电力企业编

出版社:中国计划出版社

出版时间:2015-06-01

书籍编号:30623238

ISBN:9787518201228

正文语种:英文

字数:122012

版次:1

所属分类:社会科学-法律

全书内容:

DL/T5418-2009火电厂烟气脱硫吸收塔施工及验收规程(英文版)pdf/doc/txt格式电子书下载

图书在版编目(CIP)数据


DL/T 5418—2009火电厂烟气脱硫吸收塔施工及验收规程:英文/中国电力企业联合会组织编译.—北京:中国计划出版社,2015.5


ISBN 978-7-5182-0122-8


Ⅰ.①D… Ⅱ.①中… Ⅲ.①火电厂-烟气脱硫-吸收塔-工程验收-规程-英文 Ⅳ.①X773.013-65


中国版本图书馆CIP数据核字(2015)第060686号


Chinese edition first published in the People\'s Republic of China in 2009


English edition first published in the People\'s Republic of China in 2015


by China Planning Press


3rd Floor,C Tower,Guohong Building


No.A11,Muxidi-Beili,Xicheng District


Beijing,100038


www.jhpress.com


Printed in China by Beijing Jinghua Hucais Printing CO.,LTD


©2009 by National Energy Administration of the People\'s Republic of China


All rights reserved.No part of this publication may be reproduced or transmitted in any form or by any means,graphic,electronic,or mechanical,including photocopying,recording,or any information storage and retrieval systems,without written permission of the publisher.


This book is sold subject to the condition that it shall not,by way of trade or otherwise,be lent,resold,hired out or otherwise circulated without the publisher\'s prior consent in any form of blinding or cover other than that in which this is published and without a similar condition including this condition being imposed on the subsequent purchaser.


ISBN 978-7-5182-0122-8

Foreword


This Code is written in accordance with The Notice of Industrial Codes and Standards Revision and Planning in 2006 issued by General Office of National Development and Reform Commission of the People\'s Republic of China(Document No.〔2006〕1093).


Appendix A is normative appendix and Appendix is informative appendix.


This code is issued by China Electricity Council.


This code is centralized under the Technical Committee on Environmental Protection of Standardization Administration of Power Industry.


This code is drafted by GCL Engineering Limited and China Huadian Engineering(Group)Co.,Ltd.


This code is drafted by Sun Keqin,Yang Sumei,Xu Yanzhong,Guo Qingwei,Qu shouxin,Fu Wenxing and lin Fei.


This code is translated by Wang Bole,Lu Nini and Huang Mengqiu,and reviewed by Fu Wenling,Li Xionghao,Yang Sumei and Yang Xiu.


This is initial issue.


If there is any comment or suggestion during the execution of the code,please send it to the Standardization Administration of China Electricity Council(Address:No.1 Hutong 2 Baiguang Road,Beijing,China,100761).

1 Scope


This Standard provides technical requirements on the construction and acceptance for absorbers used in wet flue gas desulphurization(WFGD)devices of a thermal power plant.


This Standard applies to the construction and acceptance of any absorber in a WFGD device of a thermal power plant,of which the main structure is made of common carbon steel and the internal anticorrosion lining is made of glass resin flake or rubber.The absorber comprises of the shell,internals,and all accessories or structures welded to the external surface of the shell.

2 Normative References


The following normative documents contain provisions which,through reference in this text,constitute provisions of this Standard.For dated references,all subsequent amendments(not including the erratum)or revisions do not apply to this Standard.However,parties who reach agreements based on this Standard are encouraged to investigate the possibility of applying the latest editions of these documents.For any undated references,the latest version shall apply to this Standard.


GB/T 983     Stainless steel covered electrodes


GB/T 985.1—2008     Recommended joint preparation for gas welding,manual metal arc welding,gas-shield arc welding and beam welding


GB 4053.1     Safety requirements for fixed steel ladders and platform-Part 1:Steel vertical ladders


GB 4053.2     Safety requirements for fixed steel ladders and platform-Part 2:Steel inclined ladders


GB 4053.3     Safety requirements for fixed steel ladders and platform-Part 3:Industrial guardrails and steel platforms


GB/T 4842     Argon


GB/T 5117     Carbon steel covered electrodes


GB/T 5118     Low alloy steel covered electrodes


GB/T 5293     Carbon steel electrodes and fluxes for submerged arc welding


GB/T 8110     Welding electrodes and rods for gas shielding arc of carbon and low alloy steel


GB/T 8923.2     Preparation of steel substrates before application of paints and related products-Visual assessment of surface cleanliness-Part 2:Preparation grades of previously coated steel surface after localized removal of previous coatings


GB/T 10045     Carbon steel flux cored electrodes for arc welding


GB/T 12470     Low-alloy electrodes and fluxes for submerged arc welding


GB/T 14957     Steel wires for melt welding


GB/T 17853     Stainless steel flux cored wires


GB/T 8241.4     Rubber lining-Part 4:Flue gas desulphurization lining.


GB 50128     Code for construction and acceptance of vertical cylindrical steel welded storage tanks


GB 50236     Code for construction and acceptance of field equipment,industrial pipe welding engineering


DL/T 679     Code for welder technical qualification


DL/T 868     Code of welding procedure qualification


DL/T 869     The code of welding for power plant


DL 5009.1     Code of safety operation in power engineering construction-Part 1:Thermal power plants


DL/T 5072     Code for Designing insulation painting of thermal power plant


HGJ 32—1990     Chemical processing equipment of rubber lining


HG/T 2537     Carbon dioxide for welding


HG/T 2640     Application specifications for glass flake lining


HG/T 3797     Mortar of glass flake lining


HG 20202     Specification for construction and acceptance of degreasing work


JB 4730     Nondestructive testing of pressure-bearing equipment


JB/T 4735     Steel welded atmospheric pressure vessels


JB/T 4736     Reinforcement pad


SJ/T 10743     Tungsten-cerium electrodes for inert gas shielded arc welding,plasma welding and cutting

3 Terms and Definitions


For the purpose of this Standard,the following terms and definitions shall be applied.


3.0.1 Absorber


Equipment used to remove SO2 from the flue gas by using a physical or chemical treatment method as appropriate.The equipment is a major single component use

....

本站仅展示书籍部分内容

如有任何咨询

请加微信10090337咨询

本站仅展示书籍部分内容
如有任何咨询

请加微信10090337咨询

再显示